The Oreve™ Mess-Free Oil Extractor Pump pulls old oil up through your dipstick tube, so you never have to get under the vehicle. Clip it to the battery, drop the hose in, flip the switch.

Voltage: 12V DC
Power: 80W
Current: 6.7A
Flow Rate: 0.13 GPM
Duty Cycle: 30 minutes continuous
Water Resistance: IPX4
Material: Plastic housing
Includes: Pump, battery clamp cable, 6mm × 1200mm inlet hose, 12mm × 1500mm outlet hose, 2 hose clamps
Compatible fluids: Engine oil, lubricating oil, differential / gear oil. Not for gasoline or water.

How to Use Your
Oreve™ Mess-Free Oil Extractor Pump

Change your oil from the top. No jack, no drain pan, no drain plug.

1. Remove the black caps on both pump ports.
2. Attach the hoses with the included clamps (thin hose = IN, wide hose = OUT).
3. Clip the red clamp to the battery's positive terminal and the black clamp to the negative.
4. Feed the inlet hose down the dipstick tube until it touches the bottom of the pan. Put the outlet hose in your collection jug.
5. Flip the switch. The pump self-primes and pulls the oil out on its own.

Product Details

Built for people who change their own fluids and are done crawling around on concrete to do it.

No Under-Car Work — skip the jack, ramps, jack stands and drain pan.
No Stuck Drain Plug — never fight an over-torqued plug again.
Self-Priming — no hand pumping. It pulls the oil on its own.
Overcurrent Protection — automatically eases power on cold, thick oil to protect the motor.
Clear-Cover Switch — one-touch on and off for instant shut-off.

Change your oil right where you parked. Your back never touches the concrete.

1. How does it work?

The hose goes down your dipstick tube to the bottom of the oil pan. The pump clips to your car's battery, and when you flip the switch it pulls the oil up and out into your collection jug.

2. Do I need to pump it by hand?

No. It's self-priming. Flip the switch and the pump does the work.

3. What power does it need?

It runs on 12V DC. Just clip it to your vehicle's battery. No outlet or extension cord needed.

4. What fluids can I use it with?

Engine oil, lubricating oil, and differential / gear oil. Do not use it for gasoline or water.

5. What vehicles can I use it on?

Cars, trucks, motorcycles, boats, RVs, lawn mowers, generators and other engines with a dipstick tube or accessible oil access.

6. How long can I run it at once?

Up to 30 minutes of continuous use. Most oil changes take far less.

7. Does it handle cold, thick oil?

Yes. The built-in overcurrent protection automatically reduces power on cold, viscous oil to protect the motor.

8. What's in the box?

The pump, battery clamp cable, one 6mm × 1200mm inlet hose, one 12mm × 1500mm outlet hose, and two hose clamps.

Shipping

• Processing Time: Orders are processed within 1–2 business days.
  
• Delivery Time: Standard shipping typically takes 3–7 business days within the U.S. (International shipping times may vary).
  
• Tracking: You’ll receive a confirmation email with tracking details once your order has shipped.

Returns

We want you to love your Oreve™ order! If you’re not completely satisfied:

• Return Window: You may return your product within 30 days of delivery for a full refund.
  
• Condition: Items must be unused, in original packaging, and with all accessories included.
  
• Return Shipping: Customer is responsible for return shipping unless the product is defective or damaged upon arrival.
  
• Refunds: Refunds are issued to your original payment method within 5–7 business days after we receive your return.
  

Exchanges & Warranty

• If your item arrives damaged or defective, we’ll replace it at no extra cost.
  
• All Oreve products come with a 1-year limited warranty for your peace of mind.
  

How to Start a Return

1. Contact our support team at contact@oreve.co with your order number.
   
2. We’ll provide return instructions and a shipping label (if applicable).
   
3. Pack and ship your item back to us.
   

✨ Oreve Guarantee: If you’re not happy, we’ll make it right.