Towel Size: 12" x 12" (1 full square foot)
Clay Surface Type: Porous synthetic clay compound
Compatible Surfaces: Paint, glass, headlights, carbon fiber
Form: Hybrid clay towel — no bars, no applicator pads needed
Reusability: Hundreds of uses — rinse, air dry, repeat
Lubricant Required: Yes — quick detailer spray or water
Safe For: All vehicle paint types, including delicate finishes
Scratch Risk: None — no marring or swirl marks when used correctly
Stackable: Yes — use before wax, sealant, or ceramic coating application
Contaminant Removal: Bonded surface deposits, iron fallout, industrial contamination, tar
Results Timeline: Silky smooth finish noticeable after first use
Guarantee: 30-day money-back guarantee

How to Use
Oreve™ Blackline Clay Towel

Welcome to the Oreve — the clay towel engineered to replace your clay bar for good and cut your decontamination time down to minutes.

Step 1: Prep Your Surface

• Wash your car thoroughly before claying. You want loose dirt off the surface so the clay towel can focus on bonded contaminants.
• Work in the shade or indoors if possible — avoid hot panels in direct sunlight.

Step 2: Apply Your Lubricant

• Spray your quick detailer or clean water generously onto a small section of the panel you're working on.
• Never use the Blackline dry. The lubricant is what lets it glide safely and pull contaminants without any risk of marring.

Step 3: Clay the Surface

• With light to medium pressure, glide the Blackline across the lubricated surface in straight back-and-forth strokes.
• You'll hear it working — that light resistance is the clay pulling bonded contaminants out of your paint.
• At 12" x 12", you can cover an entire hood or door panel in seconds. Work panel by panel until the surface goes completely silent and smooth.

Step 4: Wipe and Inspect

• Follow up with a clean microfiber towel to remove any lubricant residue.
• Run your fingertips across the paint. If it feels glass-smooth, you're done. If you still feel texture, make one more pass.

Step 5: Rinse and Store

• When you're finished, rinse the Blackline thoroughly under running water until the water runs clear.
• Let it air dry completely before storing.
• It's ready for your next detail session — no bar to toss, no waste.

Usage Tips

• Clay before every wax, sealant, or ceramic coating application for maximum bonding and finish quality.
• For heavily contaminated vehicles, apply slightly more lubricant and use slower, deliberate strokes.
• The Blackline is rated for hundreds of uses — treat it right and it'll outlast every clay bar you've ever bought.

✨ Oreve Promise: The Blackline isn't a gimmick — it's a fundamentally better way to decontaminate your paint. We built it because we were tired of clay bars that wasted time, broke down fast, and cost a fortune to replace. Detail smarter. Finish smoother. Never go back.

Product Details

A full square foot of porous synthetic clay bonded to a microfiber towel — engineered to remove bonded surface contaminants from paint, glass, headlights, and carbon fiber in a fraction of the time of a traditional clay bar.

10x the Coverage of a Clay Bar - 12" x 12" means full panel coverage in seconds, not minutes.

Silky Smooth Finish - Lifts iron deposits, industrial fallout, and bonded contamination for a glass-like surface feel.

Reusable Hundreds of Times - Rinse, air dry, repeat. No more tossing bars after a single drop.

Safe on All Surfaces - Paint, glass, headlights, and carbon fiber with zero scratching or marring.

No Diminishment Over Time - Synthetic clay compound holds its decontamination power use after use, unlike traditional clay that degrades.

Works Before Any Coating - The ideal prep step before wax, sealant, or ceramic coating for maximum adhesion and finish quality.

Hybrid Design - Microfiber backing gives you full-panel control and comfort that a clay bar simply can't match.

Results on First Use - Smooth, contaminant-free paint you can feel and hear after a single pass.

Compatible With Any Detailing Routine - Use it as a direct replacement for your clay bar at any stage of your detail process.

Built for Enthusiasts and Professionals - Whether it's your weekend driver or your $160K build, the Blackline delivers the same result every time.

1. How does the clay towel compare to a traditional clay bar?

10× more surface area for faster coverage. Reusable even if dropped.

2. Will it scratch my paint?

No—safe on paint, glass, headlights, and carbon fiber with lubricant.

3. Do I need to use a lubricant with it?

Yes—use water or a detailer spray for smooth, safe use.

4. How do I clean it after use?

Rinse until clean, then air dry.

5. How many times can I reuse it?

Hundreds of uses.

6. What surfaces can I use it on?

Paint, glass, headlights, and carbon fiber.

7. When should I clay bar my car?

When paint feels rough—usually every 3–6 months or before protection.

8. Does it work as well as a traditional clay bar?

Yes—same results, much faster.

Shipping

• Processing Time: Orders are processed within 1–2 business days.
  
• Delivery Time: Standard shipping typically takes 3–7 business days within the U.S. (International shipping times may vary).
  
• Tracking: You’ll receive a confirmation email with tracking details once your order has shipped.
  
• Free Shipping: We offer free standard shipping on all orders over $50.

Returns

We want you to love your Oreve™ Blackline Clay Towel! If you’re not completely satisfied:

• Return Window: You may return your product within 30 days of delivery for a full refund.
  
• Condition: Items must be unused, in original packaging, and with all accessories included.
  
• Return Shipping: Customer is responsible for return shipping unless the product is defective or damaged upon arrival.
  
• Refunds: Refunds are issued to your original payment method within 5–7 business days after we receive your return.
  

Exchanges & Warranty

• If your item arrives damaged or defective, we’ll replace it at no extra cost.
  
• All Oreve products come with a 1-year limited warranty for your peace of mind.
  

How to Start a Return

1. Contact our support team at support@oreve.com with your order number.
   
2. We’ll provide return instructions and a shipping label (if applicable).
   
3. Pack and ship your item back to us.
   

✨ Oreve Guarantee: Our mission is to make healthy living simple, stress-free, and reliable. If you’re not happy, we’ll make it right.